Departure Address – Add Departure And Return Depot To Routes

For more convenience and efficiency, Route4Me provides multiple options for setting up the Departure Address (Depot) from which you want to start your routes. You can import a spreadsheet with the already specified Depot or let the system choose the first added address as the Departure location. Alternatively, you can add the preferred Depot address when specifying the route parameters.

Departure Address or Depot is the address from which one or multiple routes start (Start Address). If the route is optimized with the Roundtrip optimization parameter, this route will start and end at the same Departure Address (Depot). Thus, depending on the specified optimization parameters, the same Departure Address can be a Departure Depot and a Return Depot at the same time. To learn more about Route4Me’s Multiple Depot Optimization, visit this page.

 

 

To plan a new route, first, go to “Plan New Route” from the navigation menu. Next, select one of the preferred route data import methods: Interactive Map Editor, Copy-and-Paste, Upload a File, or Import Data.

Select the preferred method for importing addresses that you want to use for planning routes.

 

Manually Specifying The Preferred Departure Address

To manually specify which address you want your planned route(s) to start from, first, go to the Departure tab and then input the preferred Depot address into the corresponding field. After that, specify the rest of the route parameters to your preference and proceed.

Add the preferred departure depot in the Departure tab when specifying the route settings.

 

Next, in the Import Addresses into Route window, you can check all imported addresses and make sure that all column titles match the right data columns. NOTE: The manually specified Depot address should not be displayed in this window.

If selected earlier, the departure address will not be selected from your added addresses.

 

In the Verify Addresses on Map window, you can make sure that each added and uploaded address is geocoded with high confidence (green dots). NOTE: The manually specified Depot address will be displayed in the Verify Addresses on Map window as the first address and as a Depot icon on the map.

You can check that the selected address is the depot in the Verify Addresses on Map window.

 

Once the route is planned, this route will start from the manually specified Depot (Departure address – first address on the route). NOTE: If the route is optimized with the Roundtrip optimization parameter, this route will start and end at the same Departure Address (Depot). If you have planned multiple routes from a single address import using the Multiple Drivers Route optimization type, all planned routes will start from the same manually specified Departure Address (Depot).

Once the route is planned, the manually selected depot will be the first stop on the route.

 

Selecting The First Added Address As the Route Departure Address

To select one of the addresses you added or uploaded as the Departure Address (Depot), first, make sure that you have the Find Address field in the Departure tab empty. After that, specify the rest of the route parameters to your preference and proceed.

Leave the field empty if you want one of your added addresses to be selected as the depot.

 

When you don’t add the Departure Address manually, the first added or imported address is automatically selected as the Departure Address by the system. NOTE: When you use the Interactive Map Editor or Copy-and-Paste routing data import method, the system automatically selects the first added address as the Departure Address. When you use the Upload a File or Import Data routing data import method, the first address in the uploaded spreadsheet is automatically selected as the Departure Address.

The system will automatically select the first uploaded address as the depot for the route.

 

In the Verify Addresses on Map window, you can check and make sure that each added and uploaded address is geocoded with high confidence (green dots). The address that was added first or was the first address in the uploaded spreadsheet will be displayed as the first address on the list and as a Depot icon on the map.

Check that the first uploaded address is selected as the depot in the Verify Addresses on Map tab.

 

Once the route is planned, this route will start from the Depot Address that was the first added address or the first address in the uploaded spreadsheet. NOTE: If the route is optimized with the Roundtrip optimization parameter, this route will start and end at the same Departure Address (Depot). If you have planned multiple routes from a single address import using the Multiple Drivers Route optimization type, all planned routes will start from the same Departure Address (Depot).

The first uploaded address will be automatically set up as the first stop on the planned route.

 

Specifying The Depot (Departure Address) In The Upload Spreadsheet

To specify the preferred Departure Address (Depot) in the spreadsheet that you are uploading into the system, first, make sure that you have the Find Address field in the Departure tab empty. After that, specify the rest of the route parameters to your preference and proceed.

Leave this field empty if you want one of the uploaded addresses to be set up as the depot.

 

Next, upload your spreadsheet with the addresses that you want to use for planning one or multiple routes. NOTE: To set up a specific address in the spreadsheet you are uploading as the Departure Address, in addition to the obligatory “Address” column, you need to add the Depot column. In the Depot column, mark the address that you want to set up as the Departure Address (Depot) with Yes, and all other addresses with No (or the system will mark all Non-Depot Addresses with No automatically). To learn more about Route4Me’s spreadsheet requirements, visit this page.

The system will automatically detect the specified depot address from the uploaded spreadsheet.

 

In the Verify Addresses on Map window, the address that was marked as the Depot in the uploaded spreadsheet will be displayed as the first address on the list and as a Depot icon on the map.

Check the specified depot address on the map in the Verify Addresses on Map window.

 

Once the route is planned, this route will start from the Departure Address that was marked as the Depot in the uploaded spreadsheet. NOTE: If the route is optimized with the Roundtrip optimization parameter, this route will start and end at the same Departure Address (Depot). If you have planned multiple routes from a single address import using the Multiple Drivers Route optimization type, all planned routes will start from the same Departure Address (Depot).

The depot specified in the uploaded spreadsheet will be selected as the first stop on the route.

 

 

Was this article helpful?
Still can't find what you're looking for? Contact us
Route4Me

About Route4Me

Route4Me has over 40,000 customers globally. Route4Me's Android and iPhone mobile apps have been downloaded over 2 million times since 2009. Extremely easy-to-use, Route4Me's apps create optimized routes, synchronize routes to mobile devices, enable communication with drivers and customers, offer turn-by-turn directions, delivery confirmation, and more. Behind the scenes, Route4Me's operational optimization platform combines high-performance algorithms with data science, machine learning, and big data to plan, optimize, and analyze routes of almost any size in real-time.