Transportation Cross-Docking Route4Me Route Planning and Optimization
Transportation Cross-Docking (TCD) is used for gaining economies of scale by receiving shipments from multiple carriers or suppliers in the less-than-truckload (LTL) and consolidating them into full truckload (FTL) shipments in the distribution center from where they are shipped to end customers. With Route4Me, you can streamline your entire supply chain of transportation cross-docking operations and transactions by planning optimized routes for transporting goods from multiple warehouses in the LTL to a single distribution center as efficiently and fast as possible. Once the products are assembled into the mixed pallets, you can plan optimized routes with the most optimal stops sequences for distributing the final product pallets to end customers or other assembly lines in the FTL. To create thousands of optimized routes for your transportation cross-docking purposes all you need to do is to import the addresses of your warehouses and the main distribution center into the system and Route4Me will compute the most cost-effective and time-efficient solution for you.
To plan and optimize routes for transportation cross-docking, first, go to “Plan New Route” from the navigation menu and then select the “Upload a File” option.
Next, to plan multiple routes where each route starts from its own depot or warehouse and then all routes meet at the same distribution center, specify the following route optimization settings:
- Go to the “Optimization” tab;
- Select the Multiple Drivers Route optimization type so that the system can plan multiple routes;
- Select the “End route at any address” option to end all planned routes at the distribution center (TCD does not support return).
After that, import the spreadsheet with your addresses into Route4Me. To plan multiple depot routes with the predefined distribution of addresses per route/depot, besides the obligatory “Address” column, insert the “Depot” and “Route” columns into the route data spreadsheet. In the “Depot” column, mark the addresses that you want to set up as depots with “1” and the addresses that you want to set up as route stops (distribution center) with “o” (“1” = depot; “0” = route stop). Use the “Route” column to assign each address to a particular route that will start from its own corresponding depot.
Thus, to make each route start from its own depot or warehouse and then make all routes meet at the same distribution center for unloading, create address pairs where the first address (or the address that is marked as depot) in each pair is the address of a particular warehouse/depot and the second address is the address of the main distribution center. To learn more about routing with multiple depots, visit this page.
After uploading the spreadsheet, Route4Me processes the imported data and displays it in the corresponding window. After that, make sure that all columns contain the right data. The addresses that you want to be set up as depots should be marked as “Yes” in the “Depot” column. For the system to process the data automatically, select the “Auto (attempt detection)” option respectively. Alternatively, you can manually match column titles to the data contained in the corresponding columns. To proceed, click on the “Continue to Review” button.
In the “Verify Addresses on Map” window, you can view all imported and processed addresses on the map, as well as check their geocoding statuses. All depots or warehouses are displayed on the map as depot icons and the main distribution center is displayed as a route stop. After checking the addresses, click on the “Finish Import” button.
Once the routes are planned, each delivery route will start from its own depot from where the products will be delivered to the main distribution center in the less-than-truckload. Provided that each route is planned as “End route at any address,” after unloading products at the distribution center, the corresponding vehicles will not need to return to their depots.
After you planned routes for receiving inbound goods in the less-than-truckload, you can plan outbound routes to deliver the final product pallets from the distribution center to end customers as full truckload shipments. To do so:
- Go to the “Optimization” tab;
- Select the preferred optimization type: Single Driver Route, Multiple Drivers Route, or Balanced Team Route;
- Choose where to end the routes after the last stop on each route is visited and serviced;
- Define the preferred advanced constraints. To learn more about using such advanced constraints as Pieces, Volume, Revenue, Weight, etc., visit this page.
Next, upload the spreadsheet with addresses that you want to visit. To make sure that all distribution routes will start from the same single distribution center, you can include the “Depot” column into the spreadsheet. To learn more about Single-Depot Routing, visit this page.
In the “Verify Addresses on Map” window, you can view all imported and processed addresses on the map and check their geocoding statuses. The distribution center should be displayed on the map as the depot icon indicating that all routes will start from the same single depot. After checking the addresses, click on the “Finish Import” button.
Once one or multiple routes are planned, each distribution route will start from the same depot and branch out to different locations. Provided that each route is planned as “Roundtrip,” after unloading the products, all vehicles will return to the same depot or the same distribution center from where they started.
Thus, Route4Me can help you to streamline your entire transportation cross-docking operation by first delivering the required goods to the main distribution center in LTL and then delivering the assembled product pallets to end customers as FTL – all with seamless continuity and in the most efficient and cost-effective way. Moreover, all you need to do to plan thousands of cross-docking routes is to import a spreadsheet with addresses and Route4Me will do all the computing for you.